How to Handle it if Your Vehicle Stalls
Staying Safe During a Stall
Stalling isn’t quite as big of an issue as it was back when carbureted engines were much more common. But there are times when you engine can just die on you. Regardless of the reason, you need to be sure that you’re able to stay safe and avoid an accident. As the best auto body repair shop in the state of Montana, we want to provide you with the safety tips you need most.
Get to the Shoulder!
If you’re rolling along and the vehicle just dies, your first goal is to safely get it out of the lane of traffic. Keep in mind that your power steering is going to be gone, and you’re going to have to really tug on that steering wheel to help it move.
Pull as far over as possible, so that you’re out of traffic and in a safer place.
Avoid the Busy Street
If you aren’t able to get the vehicle off to the side of the road, and you’re forced to stop in the middle of the traffic lane, stay in the vehicle! You may be tempted to get out and get away from it (or push it to safety), but the safest place for now is inside the vehicle.
If you’re not on a busy street, you can get out and move far enough away that if an inattentive driver hits your rig, you don’t get injured. Call 911 right away to alert the police to the traffic hazard.
Turn on the Flashers
As soon as the vehicle dies, light up those flashers. You want to make sure that people know there is something wrong with your vehicle. Get them blinking until you are able to start the vehicle again or until the tow truck is able to drag it away.
Deploy Emergency Signals
If you have gone through our article on the essentials for your car’s trunk, then you know that one of the provisions you should always have around are emergency signaling devices. Road flares were once a common device, but more and more people are turning toward reflective road triangles instead. They last longer, are safer, and pack down nice and small.
When your vehicle is off to the side and safe, put your signals out to help warn other drivers that there are issues going on.
Shut it Down and Wait
When the vehicle has come to a stop, turn it off. Sure, it’s already not running, but you want to put it in park (if it’s an automatic) and turn it off completely. Then you get to wait a little while. A few minutes should do it. You want excess fuel to evaporate, components to cool, and the car to do a little “soft reset” on itself.
After a few minutes, try to start it up again. If it fires right up, your goal is to get it to the mechanic to see what the issue is. At the very least, make sure it’s moved to a safe location.
Call for Help
There’s a good chance that the vehicle won’t start back up, or at least not right away. When you have gotten out of traffic (if possible), and placed signals around (if it’s safe to get out and do so), it’s time to hop on the phone and place a call for help. The sooner a tow truck can pick you up, the sooner you will be back to safety.
Big Sky Collision Center is Here for Collision Repair Needs
Being safe on the roads can drastically lower your risk of being involved in an accident. But they still happen. Sometimes you have a lapse in judgment, sometimes the weather happens, and sometimes other people hit you.
When you need collision repair in Billings, Montana, think of Big Sky Collision Center to get your vehicle restored to factory safety standards.